|
See Below The Quality Of Parts We Use In Our Crate
Engines
-
Brand New 4 bolt main block,
two piece rear seal
-
New 350 Cast
crankshaft assembled with tri
metal rod and main bearings
-
New
Performance I-beam
connecting rods (rated for over 500hp)
-
A set of high
performance pistons with 9.6:1
compression
-
Three piece true double
roller timing set
-
Hand selected performance
camshaft to achieve the idle & throttle response to
customer’s desire
-
(16) New high rev
lifters (anti-pump up)
-
Dart Pro One
performance aluminum cylinder heads 64cc with 200cc
intake runners
-
(8) Stainless steel
2.02 intake valves
-
(8) Stainless steel
1.60 exhaust valves
-
(16) High performance
valve springs and retainers (to match camshaft)
-
7/16 screw in studs
and hardened guide plates
-
(16) Chrome Moly
push rods
-
(16) Performance true
aluminum roller rockers
-
Engine will be assembled
with all new bolts
-
High volume oil
pump and screen
-
Chrome oil pan
-
Chrome dip stick and tube
-
Chrome timing cover
-
Professional products
performance balancer
-
Fel-Pro performance
gaskets
-
The complete rotating
assembly will be balanced
-
Edelbrock aluminum RPM
Air Gap intake manifold
-
Chrome thermostat housing
-
Edelbrock
carburetor w/ electric choke (upgrade to a Holley
or Demon for $300)
-
14" Chrome air cleaner
-
MSD Pro Billet
Distributor (Requires MSD 6AL
Ignition Control)
-
MSD blaster II coil
and bracket
-
8 Autolite spark plugs
-
Custom fit Taylor 8mm ignition wires (color of
choice black,
red,
blue,
yellow,
green,
orange
no extra charge)
-
High flow cast iron
water pump
-
Chrome valve covers
-
Chrome breather
-
Complete PCV ventilation
system
-
All engines will come with
starter and flex plate (for auto trans),
additional $200 for manual transmissions.
-
Engines are photo
documented during the building process so you can
see the quality of parts and workmanship that goes into
your engine.
-
Each engine is live run
tested, timing set, and carburetor adjusted for
optimum performance
We video tape your live run engine, and send you
a copy
All of our turnkey engines come with a
1 year warranty with unlimited mileage
|
Carbureted Turn- Key Drop In Ready Price Only $5,995


Customize Your Crate Engine
|
Mass-Flow Fuel
Injection

|
Mass-Flow Fuel Injection Kit Includes:
-
Mass-Flow
EFI Custom Intake Manifold
-
4 Valve
1000cfm Throttle Body
-
8
Fuel Injectors
-
Fuel Rails
-
Mass Air
Flow Sensor
-
Pre-Tuned
ECM
-
Wiring
Harness
-
All
Sensors Required To Make System Work
|
Add $3,200
|
Polished Engine Upgrade Kit:

- Polished Oil Pan
- Polished Timing Cover
- Polished Ball Milled
Valve Covers
- Polished Edelbrock
Cylinder Heads
- Polished Edelbrock
Intake Manifold
- Polished Edelbrock Water
Pump
- Polished Billet Ball
Milled Wire Looms
- Edelbrock Endura Shine
Carburetor
- Polished Air Cleaner
Add $1,425
|
|
|
|

Alternator
 |
Alternator, Power
Steering
 |
| Add $870 |
Add $1,430 |
|
|
Alternator, Power Steering, And AC
 |
"Style
Tracks" Alternator, Power Steering
Coming Soon |
| Add $1,870 |
Add $1,700 |
|
|
|
"Style Tracks" Alternator, Power
Steering, And AC
 |
"Ultra
Drive" Alternator, Power Steering, And AC
 |
| Add $1,930 |
Add $2,450 |
|
| |
|
|
Whether
your vehicle is a hot rod, street car, race car, or even a
tow truck, here at Pro-formance Unlimited we are here to
help design and build the combination that best suits your
vehicles needs. Please browse our engine combinations listed
below or custom design one of your own. Pro-formance
Unlimited is best known for our precision custom designs.
From that special built stroker engine to that turn-key drop
in ready crate engines, call Doug or Steve we will be happy
to answer any of your questions.
All engines are custom built to order for
total customer satisfaction
All major credit cards accepted
Call us today for a quote
1-800-267-3940
|
|

|

|

|
|
350 Short Block
|
|
350 Long Block
|
|